FORMULATION (BY WEIGHT)
	Twin Pack	PART A (Black)	2.45 Parts
	Sachet	PART B (Orange)	1 Part

CURED MATERIAL PROPERTIES
	The cured material has the following typical properties
	a	Hardness (Shore A)	70
	b	Tensile strength (MN/m^2)	12
	c	Tear strength BS903:A3-A (kN/m)	6
	d	Elongation at break (%)	280
	e	Density (kg/m^3)	1080
	f	Volume resistivity (T ohm-m)	36
	g	Surface resistivity (T ohm/sq)	10
	h	Voltage breakdown (KV/mm)	11
	i	Dielectric constant (at 1MHz)	4.5
	j	Water Absorption (%) (1000hrs at NTP) (Sample just submerged in water)	3.2
	k	Temperature range - usable (deg C)	-60 to +110

BASE COMPONENT AND SYSTEM PROPERTIES
	The components and mix have the following typical properties
	l	Viscosity of mix at 25 degC (mPa s) (Immediately after mixing)	570
	m	Gel time 150g at 25 degC (min)	10
	n	Cure time 150g at 25 degC (hr)	24
	o	Shelf life at 25 degC (months)	6
	p	Health and Safety: Safety Data Sheets	EMC 69T A & B

The information in this Data Sheet is based on data available at the time of preparation and is believed to be reliable.
However, this information is provided without any warranty, expressed or implied, regarding its accuracy or results obtained from the use thereof. You must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and the users of this product.

PDM Neptec

4-6 Alton Business Centre   Omega Park   Alton   Hampshire   GU34 2YU   England Telephone: +44 (0)1420 85848   Facsimile: +44 (0)1420 84288 E-mail: sales@pdmneptec.com   Web Site: http://www.pdmneptec.com

Download Safety Data Sheet for EMC69T Part A (PDF file - 37KB)
Download Safety Data Sheet for EMC69T Part B (PDF file - 37KB)

Return to PDM Data and Instruction Sheets menu